Sign up for the QMED & MD+DI Daily newsletter.
3-D Printing Works Layer by Layer Kind of Like the Way Roads are Paved (video)
A live demo of 3-D printer at work shows how material is extruded like a glue gun with the product built layer upon layer similar to way roads are paved.
July 9, 2013
1 Min Read
3-D printing holds great promise for the medical field, not only in terms of bringing new technology to solve unmet clinical needs for patients, but also in speeding up the R&D and prototyping processes for device firms.
At the MD&M Conference & Exposition in Philadelphia in mid June, various vendors were showcasing the capabilities of 3-D printing. An engineer from one Minnesota company - Stratasys, which has several different 3-D printers on the market - talked about how doctors are using it as a communication tool and to do dry runs of actual procedures.
Another company - Cimquest, a reseller of Stratasys' printers - was doing a continuous demo of a small 3D printer that is able to make a pill bottle in roughly 25 min. The booth drew quite a bit of attention and so I decided to stop by and talk with Cimquest's president and CEO Rob Hassold. Hassold explained the way the printer works, noting that Stratasys printers range from $10,000 to roughly a "couple of hundred thousand dollars."
-- By Arundhati Parmar, Senior Editor, MD+DI
You May Also Like
Empatica Launch Next-Gen FDA-Cleared Epilepsy WatchMar 1, 2024|2 Min Read
Safeguard Medical Devices: A Complete Approach to Device Lifecycle SecurityApr 4, 2024|13:00 EDT
Boston Sci Nabs FDA Approval for Agent DCBMar 1, 2024|2 Min Read
Masimo Takes Apple's Hail Mary Pass in StrideFeb 29, 2024|3 Min Read