The OPRA Implant System has been on the market under a humanitarian device exemption since 2015 and is now fully approved by FDA for patients who have trouble with conventional socket prosthetics.

Amanda Pedersen

February 4, 2021

3 Min Read
Image by Anna - Adobe Stock

FDA approved the first implant system for adults who have above-the-knee amputations and might not be able to use a conventional socket prosthetic device.

The Osseoanchored Prostheses for the Rehabilitation of Amputees (OPRA) Implant System, has been on the U.S. market since 2015 under a humanitarian device exemption, and FDA blessed the prosthetic device with a pre-market approval in late December. The approval expands options for people with above-the-knee amputations and can help those who have had or may have problems with rehabilitation and have not been able to benefit from available socket prostheses, according to Capt. Raquel Peat, PhD, director of FDA's Center for Devices and Radiological Health's Office of Orthopedic Devices.

“Prostheses can help people who have lost a leg due to trauma or cancer to regain mobility and to more easily participate in everyday activities," Peat said.

A conventional leg prosthesis uses a specially-fitted, cup-like shell called a socket that fits over the remaining portion of the patient’s leg (the residual limb remaining after amputation) to secure the device to the leg. Some patients may not have a long enough residual limb to properly fit a socket prosthesis or may have other conditions, such as scarring, pain, recurrent skin infections or fluctuations in the shape of the residual limb that prevent them from being able to use a prosthesis with a socket. The OPRA Implant System is surgically anchored and integrated into the patient’s remaining thigh bone to allow connection to an external prosthetic limb.

The OPRA Implant System is installed with two surgical procedures. In the first procedure, a cylinder-shaped fixture is implanted into the central canal of the remaining thigh bone. Approximately six months later, after tissue has grown to anchor the fixture and the skin tissue has healed, a second surgery is performed to attach additional device components of the OPRA Implant System to the fixture from the previous surgery. The OPRA Implant System extends through the skin at the bottom of the patient’s residual limb and connects to the prosthesis. 

After the second surgery, the patient works with a trained physical therapist to gradually place weight on the OPRA Implant System using a training prosthesis. Patients require about six months of training and rehabilitation after the second surgery, before being fitted with their own customized prosthesis by a trained prosthetist.

FDA evaluated the safety and effectiveness in a clinical study of 65 participants who received the OPRA Implant System. Effectiveness was assessed using the Questionnaire for Persons with a Transfemoral Amputation, a patient reported outcome measure that reflects frequency of use, patient’s mobility, problems with the device and patient’s overall health. The average improvement in the prosthetic use score on a 100-point scale, was 35.1 points at two years and 39.6 points at five years as compared to their reported scores with a conventional socket prosthesis. Adverse events reported during the study included: infection, mechanical complications, pain, injury and loosening of the fixture.

The OPRA Implant System is manufactured by Integrum AB in Mölndal, Sweden.

"We are thrilled by the FDA's decision and extremely proud of this unprecedented achievement by a Swedish medtech company in dynamic growth," said Maria Lopez, CEO of Integrum.

Integrum noted that the approval marks the end of a complex regulatory process that began in 2008. The company said "only a handful of Swedish companies" have been granted a FDA approval through the PMA process.

About the Author(s)

Amanda Pedersen

Amanda Pedersen is a veteran journalist and award-winning columnist with a passion for helping medical device professionals connect the dots between the medtech news of the day and the bigger picture. She has been covering the medtech industry since 2006.

Sign up for the QMED & MD+DI Daily newsletter.

You May Also Like