Formulated for fast, on-demand curing using the BlueWave LED Prime UVA spot-curing lamp, a medical device assembly adhesive cures tack-free in less than 0.4 seconds under LED exposure. The moisture-resistant 210-CTH is designed to bond a variety of plastics used in the manufacture of catheters, including polycarbonate, polyurethane, ABS, and PVC, and is suitable for y-connector assembly, connector-to-tube bonding, and balloon bonding.

July 14, 2011

1 Min Read
Adhesive Suited for Catheter Assembly

Formulated for fast, on-demand curing using the BlueWave LED Prime UVA spot-curing lamp, a medical device assembly adhesive cures tack-free in less than 0.4 seconds under LED exposure. The moisture-resistant 210-CTH is designed to bond a variety of plastics used in the manufacture of catheters, including polycarbonate, polyurethane, ABS, and PVC, and is suitable for y-connector assembly, connector-to-tube bonding, and balloon bonding. The adhesive’s ability to cure rapidly maximizes consistency and minimizes stress in catheter assembly. ISO 10993 approved, this flexible, light-curable adhesive does not contain solvents and is compatible with gamma, EtO, and E-beam sterilization methods. It also exhibits good adhesion to a variety of substrates.

Dymax Corp.
Torrington, CT, 860/482-1010

Sign up for the QMED & MD+DI Daily newsletter.

You May Also Like